P/N: ETI0001-1443 2.0 kVA Rugged Rackmount MilSPec UPS with InternalIntelligent PDU

Part Number:
NSN: 6130-01-567-2302 RuggedMil Spec® 2000 VA Integrated
Rackmount UPS and Intelligent 
Power Distribution Unit Combination

Boeing / Navy Submarine Rugged Mil SpecStandard Product Military Power® Isolated Dual Source Input N5 UPS Configuration 
Ultra Quiet 2000 VA Rack Mount, Shallow Depth UPS w/ Integrated
8 Circuit, 2 Pole, Intelligent, Solidstate Power Distribution Unit

ETI0001-1443 Rugged MilSpec UPS and PDU Standard Front Panel LayoutP/N:
ETI0001-1443 Rugged Mil Spec UPS and PDU 
Standard Front Panel Layout With 2U Battery Module

NSN: 6130-01-567-2302

ETI0001-1443 Rugged MilSpec UPS and PDU Standard Rear Panel LayoutP/N:
ETI0001-1443 Rugged Mil Spec UPS and PDU 
Standard Rear Panel Layout With 2U Battery Module

The field proven Military Power® UPS line is ideally suited for military,industrial, computer and telecommunications applications requiring high reliability, rugged construction, compact size and light weight design.These units are equally suited for use in shipboard, airborne, vehicular, fielddeployed or fixed locations with controlled or uncontrolled environments.The
ETI0001-1443 was specifically designed to meet the stringentrequirements of Boeing for use in multiple programs.The
ETI0001-1443 does not require a separate PDU since the PDUfunctions are already integrated into the UPS module. This saves rack space, cabling andexpense while improving overall reliability.

The heavy-duty chassis, occupying only 5.25”(3U) for the electronics and 3.5" (2U) for the battery module by 16” depth,delivers up to 2000 VA of clean, uninterruptible power. Therounded metal corners and rugged handles, both front and rear, aid in safehandling. Internally, all major components are well secured and electricallyinsulated to prevent damage due to shock and vibration in any axis. 

The internal shieldedinput transformer provides galvanic isolation with provisions for both domestic(115 VAC, CONUS) and optional autoranging international input voltages (85-270 VAC,OCONUS). Theunit also operates as a frequency converter, taking 46-70 hertz input andconverting it to 60 hertz power. Special EMI/RFI filters and inputpower factor correction minimize both input current and harmonics.
ETI0001-1443 accepts two independentAC power sources and includes inrush current limiting. TheUPS can operate from either power source automatically and does not use itsbattery unless both sources have failed. 

The inputcircuit breaker and the galvanic isolation transformerall provide a double pole isolated source for all installations including shipboard systems oroverseas locations where phase references and grounding are not consistent. The LED arrays keep the operatorinformed as to the unit's status including load and battery levels. The ElapsedTime Indicator records the number of operational hours for records andscheduling preventative maintenance of attached equipment. The front and rear panels alsoprovide easy access to both the AC Input and Battery Input fuses. Coupled withthe adjacent spare fuses, MTTR is reduced to less than 15 minutes.

The high intensity audible alarm can be heard in high noiseenvironments and includes an audible enable/disable switch. All controlsand protective devices are brought to the front and rear panels with critical switches orbreakers guarded. Further, all front panel devices are recessed to preventdamage or accidental operation. The internal intelligent PDU allows control ofthe individual output circuits incorporating thermal and interlock interfacesfor additional control and safety, plus Battleshort override. Battleshort can beengaged via the front panel control to override thermal shutdown. When inBattleshort, an audible alarm is sounded and an indicator is lit. The display andcontrol panel can be mounted remotely in the rack at eye level, or on the keyboard console,or on the unit front panel with only a logic level cable connection. 

The rear panel provides lockingconnectors for the input and output power with various optional configurationsavailable. The output connectors are unique MS threaded metal shell connectors,each "clocked" differently so only one cable can go to each output. Thisunit draws air through the front air filter and exhausts out the rear vent into the rack.This allows the unit to be used in either negative or neutral pressureracks. The fan is a special extra quiet version to keep the unit's overallaudible level below 44 dB. 

The batteries are maintenance free with immobilized electrolyte and areconstructed of flame retardant materials. For more information, see the BatteryTechnology section. TheStatus connector provides aninterface with optional computer software providing loss of AC and low battery status as well asremote shut down capability. The UPS Remote Control and PDU Remote Control connectors provide aninterface to optional remote display/control panels. 

See the Power Distribution Units section for a listing ofstand alone PDUs. See the N3 Series for aversion of UPS without the integrated PDU and remote control.

Overall, the Military Power line is uniquely qualified for critical shipboard,vehicle, airborne or land based systems combining advanced modular designfeatures with highly reliable construction.

Technical Specifications:
NSN: 6130-01-567-2302

Output voltage: UPS 120 VAC true sinewave standard
Output rating: UPS 2000 VA, 1500 watt max standard in 3U chassis
Non-linear load capacity: UPS Up to 100% non-linear load capability w/o derating
Output voltage regulation: UPS ± 3.0% static regulation of nominal
± 4.0% dynamic (0 to 50% load step)
Overload surge capacity: UPS 110% for 10 minutes; 125% for 30 seconds
Harmonic distortion: UPS Less than 5.0% into 100% non-linear load
Output frequency: UPS 60 or 50 Hz ± 2.5% synchronized to utility
60 or 50 Hz ± 1.0% w/ utility not available
400 or 1000 Hz output available as an option
Operational status AC Input status, UPS operational, UPS alarm, Battery level, Low battery, Load level, Overload, Warm temperature, Hot temperature and Battleshort LEDs, Elapsed time hour meter
Alarm contacts for Loss of AC and Low Battery
85 dB audible alarm with audible on/off switch
Input voltage selection: Dual Source Input, two separate AC sources, 
J1A (primary) and J1B (secondary)
Nominal 115 VAC,
Input voltage tolerance: UPS 85-135 VAC @ full load without using battery, 
Down to 70 VAC @ 75% load
Input frequency: From 46 Hz to 70 Hz standard, optional to 440 Hz
Input power factor: Better than 99% typically
Input/output isolation: 2000 VA, up to 120 dB common mode, 
<1.0 mA leakage
Input transient suppression: Complies with IEEE 587, UL 1449 and Mil Std 1399
Input control/protection: Guarded 2 pole 100 G shock rated circuit breaker (CB1) plus UPS input fuse (F2), spare fuse on front
Optional cold start to turn on w/o AC present
Input power connection: MS 3102F-22-2P, 3 pin, threaded locking
MS 3102F-22-2PW, 3 pin, threaded locking
Battery type: Maintenance free immobilized electrolyte,
Flame retardant materials (Oxygen Index 28+)
Battery life: Rated for continuous service life of 5 years
DC protection: Panel mounted fuse standard, breaker optional
Battery expansion: Up to 24 hours w/ Battery Expansion Modules
Output circuits: Eight controlled outputs via solidstate relays
Output control: Local/remote control panel w/rocker switches
Thermal and remote interlock ON/OFF control
Output receptacles: (2) MS3402D16-10S
(2) MS3402D16-10SW
(2) MS3402D16-10SX
(2) MS3402D16-10SY
Dimensions (H x D x W):
Battery Module
5.25 (3U) x 16.0 x 19.0 in (133 x 406 x 483 mm)
3.50 (2U) x 15.5 x 19.0 in (89 x 394 x 483 mm)
Rack Slide Mount Patterns: Jonathan, General Devices patterns standard, others optional
Alternate Mounting Options: Table, Wall, Floor, Portable, Horizontal/Vertical
Unit weight:
UPS Module
Battery Module
65 lb. (30 kg) UPS with lift handles front and rear
55 lb. (25 kg) Battery with lift handles front and rear
Audible noise: Less than 44 dB @ 5.0 ft., ANSI "A" scale
Cooling type: High capacity, negative pressure, forced air
Cooling air direction: Front intake, exhaust to rear, others optional
Air intake filter: Washable metal filter media, others optional
Storage temperature: -40° to 158° F ambient (-40° to 70° C) with fully charged batteries
Operating temperature: 32° to 126° F ambient ( 0° to 52° C), lower / higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Storage elevation: Up to 40,000 ft (12,192 m)
Operating elevation: Up to 15,000 ft (4,572 m), higher optional
United States: Meets UL-1778 standard for UPS equipment,
MIL STDs 167-1, 454, 810, 901D Grade A, 1399-300A & 2000
Canada: CSA C22.2 No. 107 UPS safety requirements
EMI Protection: EMI/RFI FCC Part 15, Class A; EN55022; MIL STD 461 
  Autoranging International Input, Cold Start, Alternate I/O Configurations, Battery Expansion, Batteryless Operation, Battery Charger/Conditioner, Power Distribution Units, Software Interface, Asynchronous serial COM port, 10BaseT Ethernet SNMP/HTTP port,  Transport Cases, Slides and Mounting Kits

Request Product Information
*(denotes required field)
Contact ETI by mail at:
Energy Technologies, Inc.
219 Park Avenue East
Mansfield, OH 44902-1845

Contact ETI by phone or fax:
Voice: 419-522-4444
FAX: 419-522-4466