Part Number:
ETI0001-1240
Rugged Mil Spec® Rack or Fixed Mount
1000 VA UPS and Frequency Converter
Used in Medical Applications
US Air Force ECMO Medical Patient CartApplication
1.0 kVA Mil Spec UPS and Frequency Converter Rugged Rack or Fixed Mount Unit
w/ Reduced Depth and Multiple Battery Modules for
Up to 4 Hours of Battery Backup between Locations
Accepts both Aircraft Power and Commercial Power
ETI0001-1240 Rugged Mil Spec UPS Standard Front Panel Layout,
Shown w/ Rack Flanges Mounted and OneBattery Expansion Module
ETI0001-1240 Rugged Mil Spec UPS Standard Rear Panel Layout,
Shown w/ One Battery ExpansionModule, w/o Rack Flanges When
Mounted in Lower Section of the PatientCart
The field proven Airborne Power® UPS line is ideally suited for military,industrial, medical and telecommunications applications requiring high reliability, ruggedconstruction, compact size and light weight design. These units are equallysuited for use in shipboard, airborne, vehicular, field deployed or fixedlocations with controlled or uncontrolled environments. The"
ETI0001-1240" is being used by the US Air Force ECMO Cart project becauseof their stringent performance and reliability requirements.
The heavy-duty chassis,occupying only 3U (5.25" high) of rack space and 18.5" depth, has rounded metal cornersand rugged handles front and rear, aiding in safe handling. The companion 2U(3.5" high) Battery Expansion Modules are designed to be daisy chained to bring the backuptime to 4 hours in the typical configuration. In the typical ECMO Cartapplication, the base UPS unit and up to four Battery Modules are mounted in thelower underside section of the patient cart. Both module chassis areconstructed of brushed aluminum to minimize overall weight. Internally, all majorcomponents are well secured and electrically insulated to prevent damage due to shock andvibration.
The internal shieldedinput transformer provides galvanic isolation with provisions for domestic (115 VAC, CONUS) and optionally for international (230 VAC, OCONUS) inputvoltages. Special EMI/RFI filters and inputpower factor correction minimize both input current and harmonics. This specialtransformer and filters result in ultra low input leakage current required formedical applications. The unit also operatesas a frequency converter, taking 46-440 hertz input and converting it to clean,uninterruptible 60 hertz power. The input switch and the galvanic isolationtransformer all provide a double pole isolated source forsystems or locations where phase references and grounding are notconsistent. For scenarios that need hospital grade power immediately andno AC source is available to run the UPS, the Cold Start pushbutton allows the unit tostart and run from itsbattery modules before external AC is available.
The LED arrays keep theoperator informed as to the unit's status including load and battery levels. Thehigh intensity audible alarm can be heard in high noise environments. All controlsand protective devices are brought to the front and rear panels with critical switches having fingerguards. Further, all front panel devices are recessed to prevent damage or accidentaloperation. Variousoptional power distribution controls are available which mount on the front panel orremotely.
The rear panel provides a lockingconnector for the input power and six hospital grade NEMA 5-15R output receptacles. Multipleinput and output power panel options are available. Removable and washable air filters and a high capacitystainless steel ball bearing fans provideadded protection in both controlled and hostile environments. The exhaust air is diverted out the frontvent, with alternateair flow directions optional. The "
ETI0001-1240" has the added benefit of havingboth an internal battery and external battery expansion modules. The externalBattery Modules can be field replaced without having to shut the UPS down. Thisallows the backup time to be extended even further. The optional BatteryCharger/Conditioner (which has aircraft and global input capability) is usedto maintain the spare Battery Modules in ready condition at all times. The batteries are maintenance free with immobilized electrolyte and areconstructed of flame retardant materials. For more information, see the BatteryTechnology section. The Status connector provides aninterface with optional computer software providing loss of AC and low battery status as well asremote shut down capability.
See the Power Distribution Units section for alisting of stand alone PDUs. See the N5 Series
ETI0001-1479for a version of this UPS with an integrated PDU and remote control.
Overall, the Airborne Power line is uniquely qualified for criticalshipboard, vehicle, airborne or land based systems combining advanced modular designfeatures with highly reliable construction.
AC OUTPUT | |
Output voltage: UPS | 120 VAC true sinewave standard, up to 600 VAC optional |
Output rating: UPS | 1000 VA standard in 4U x 18.5" deep 0.65-0.75 pf standard, optional configurations to 24,000 VA |
Non-linear load capacity: UPS | Up to 100% non-linear load capability w/o derating |
Output voltage regulation: UPS | ± 3.0% static regulation of nominal ± 4.0% dynamic (0 to 50% load step) |
Overload surge capacity: UPS | 110% for 10 minutes; 125% for 30 seconds |
Harmonic distortion: UPS | Less than 5.0% into 100% non-linear load |
Output frequency: UPS | 60 Hz ± 1.0% independent of input frequency 50, 400 or 1000 Hz output available as an option |
Operational status | Status, load and battery LEDs, w/contacts Adjustable level,+90 dB audible alarm w/on/off |
AC INPUT | |
Input voltage selection: | Nominal 115 VAC, optional autoranging input of 85-270 VAC |
Input voltage tolerance: UPS | 85-135 VAC @ full load without using battery, to 70 VAC @ 75% load |
Input frequency: | From 46 Hz to 440 Hz standard |
Input power factor: | Better than 99% typically |
Input/output isolation: | 1000 VA, up to 120 dB common mode, <700 microampere leakage Optional <50 microampere for commercial version w/o Mil Std 461 |
Input transient suppression: | Complies with IEEE 587 and UL 1449 |
Input control/protection: | Guarded 2 pole switch w/ fuse, optional circuit breaker Cold start to turn on w/o AC present |
Input power connection: | MS 3102A-22-2P, 3 pin, threaded locking |
INTERNAL BATTERY | |
Internal battery type: | Maintenance free immobilized electrolyte, Flame retardant materials (Oxygen Index 28+) |
Internal battery life: | Rated for continuous service life of 5 years |
Internal DC protection: | Front panel mounted fuse standard |
Internal battery time: | 8+ minutes @ 100% load, 20+ minutes @ 50% (base UPS only) |
Internal battery recharge: | Recharged to nominal in <8 hours |
Internal battery replacement: | Drawout/plug-in module from front of unit |
EXTERNAL BATTERY | |
External battery type: | Maintenance free immobilized electrolyte, Flame retardant materials (Oxygen Index 28+) |
External battery life: | Rated for continuous service life of 5 years |
External DC protection: | Rear panel mounted fuse standard |
External battery time/module: | 65+ minutes @ 100% load, 130+ minutes @ 50% per module |
External battery recharge: | Recharged to nominal in twenty times the discharge time |
External battery replacement: | Drawout/plug-in module from front of unit |
DISTRIBUTION PANEL | |
Output circuits: | Six outputs standard, optional configurations |
Output control: | Optional remote control panel w/rocker switches |
Output receptacles: | NEMA 5-15R Hospital Grade, 3 pin |
MECHANICAL | |
Dimensions ( H x D x W ): UPS Each 2U Battery Module |
5.25 (3U) x 18.5 x 19.0 in (133 x 470 x 483 mm) 3.50 (2U) x 18.5 x 19.0 in (89 x 470 x 483 mm) |
Rack Slide Mount Patterns: | Jonathan, General Devices patterns, others optional |
Alternate Mounting Options: | Table, Wall, Floor, Portable, Horizontal/Vertical |
Unit weight: UPS base unit only Each 2U Battery Module |
74 lb. (34 kg) UPS with lift handles front and rear 77 lb. (35 kg) Battery with lift handles front and rear |
Audible noise: | Less than 47 dB @ 5.0 ft., ANSI "A" scale |
Cooling type: | High capacity, positive pressure, forced air |
Cooling air direction: | Rear intake, exhaust to front, others optional |
Air intake filter: | Washable metal filter media, others optional |
ENVIRONMENTAL | |
Storage temperature: | -40° to 158° F ambient (-40° to 70° C) with fully charged batteries |
Operating temperature: | -4° to 131° F ambient ( -20° to 55° C), lower/ higher optional |
Operating humidity: | 0 to 95% relative humidity (non-condensing) |
Storage elevation: | Up to 40,000 ft (12,192 m) |
Operating elevation: | Up to 15,000 ft (4,572 m), higher optional |
STANDARDS | |
United States: | Meets UL-1778 standard for UPS equipment, MIL STDs 167-1, 454, 810, 901D Grade A, 1399-300A & 2000 |
Canada: | CSA C22.2 No. 107 UPS safety requirements |
EMI Protection: | EMI/RFI FCC Part 15, Class A; EN55022; MIL STD 461 |
OPTIONAL ACCESSORIES | |
Autoranging International Input, Cold Start, Emergency Power Off, Elapsed Time Meter, Alternate I/O Configurations, Dual Source Input, Battery Expansion, Batteryless Operation, Battery Charger/Conditioner, Power Distribution Units, Software Interface, Asynchronous serial COM port, 10BaseT Ethernet SNMP/HTTP port, Transport Cases, Slides and Mounting Kits |